| Quantity: | |
|---|---|
LC105
Lincoln
The Spirit II 400 is a 400 amp microprocessor controlled, 100% duty cycle high current density plasma cutting and marking system. It utilizes a precision, dual gas torch that is capable of cutting mild steel up to 3" thick and stainless steel up to 1-1/2” thick. The system contains a manually controlled gas console, which also provides the primary interface to the entire Spirit system. For cutting mild steel, the system uses oxygen for the plasma gas and either oxygen or air for the shielding gas. When cutting stainless steel or other non-ferrous materials, air or H17 (17.5% hydrogen, 32.5% argon, 50% nitrogen) is used for the plasma gas and either air or nitrogen is used for the shielding gas. Oxygen and nitrogen are used for the preflow and postflow gases. The torch is water-cooled and consumables are machined to exacting dimensions and checked with the latest computerized measuring systems. Nine nozzle sizes (30, 50, 70, 100, 150, 200, 260, 275, and 400 amps) are available to produce excellent cut quality throughout the cutting range. Each enclosure in the system is rated for IP21S sealing, which is intended for indoor use only. The system is not suitable for use in rain or snow.
CNC Plasma Cutting Consumable Electrode Nozzle Shield Retaining Cap Swirl Ring For LC105
The Spirit II 400 is a 400 amp microprocessor controlled, 100% duty cycle high current density plasma cutting and marking system. It utilizes a precision, dual gas torch that is capable of cutting mild steel up to 3" thick and stainless steel up to 1-1/2” thick. The system contains a manually controlled gas console, which also provides the primary interface to the entire Spirit system. For cutting mild steel, the system uses oxygen for the plasma gas and either oxygen or air for the shielding gas. When cutting stainless steel or other non-ferrous materials, air or H17 (17.5% hydrogen, 32.5% argon, 50% nitrogen) is used for the plasma gas and either air or nitrogen is used for the shielding gas. Oxygen and nitrogen are used for the preflow and postflow gases. The torch is water-cooled and consumables are machined to exacting dimensions and checked with the latest computerized measuring systems. Nine nozzle sizes (30, 50, 70, 100, 150, 200, 260, 275, and 400 amps) are available to produce excellent cut quality throughout the cutting range. Each enclosure in the system is rated for IP21S sealing, which is intended for indoor use only. The system is not suitable for use in rain or snow.
CNC Plasma Cutting Consumable Electrode Nozzle Shield Retaining Cap Swirl Ring For LC105