Maxpro200 Plasma Electrode 220487 220528 Nozzle 220831 220890 Shield 220532 220536 Plasma Cutting Consumable

Varying the gouge profile

You can vary the gouge profile and the metal removal rate by varying the speed of the torch over the workpiece, varying

the distance between the torch and the workpiece, varying the angle of the torch to the workpiece, and varying the

current output of the power supply.

The following actions have the stated effects on the gouge profile:

• Increasing the speed of the torch will decrease width and decrease depth.

• Decreasing the speed of the torch will increase width and increase depth.

• Increasing the standoff of the torch will increase width and decrease depth.

• Decreasing the standoff of the torch will decrease width and increase depth.

• Increasing the angle of the torch (more vertical) will decrease width and increase depth.

• Decreasing the angle of the torch (less vertical) will increase width and decrease depth.

• Increasing the current of the power supply will increase width and increase depth.

• Decreasing the current of the power supply will decrease width and decrease depth.

Cutting parameters

The cut charts for the MAXPRO200 show the consumable parts, cutting speeds, and the gas and torch settings required

for each process, allowing for differences in the lead length. These parameters are used for cutting with both mechanized

and handheld torches, the consumable part numbers listed with each cut chart are specific to mechanized torches. Refer

to Hand held torch consumables below for the consumables to use with handheld torches.

The cut chart values in this document are recommended to provide high quality cuts with minimal dross. Because of

differences between installations and material composition, adjustments may be required to obtain desired results.

Mechanized consumables

The consumable part numbers listed above each cut chart are specific to mechanized torches.

Hand held torch consumables

The following sets of consumables are intended to be used with handheld torches for cutting mild steel, stainless steel,

and aluminum. Use the cutting parameters detailed in the Cut charts for cutting with the MAXPRO200 handheld torches.

Use the following consumables for each process.

Regarding electrodes, MAXPRO200 uses SilverPlus ® Silver electrode technology. This type of silver electrode is made of high-purity silver material, which has excellent conductivity and thermal stability. The high conductivity of silver makes current transmission smoother, reduces energy loss, and thus improves cutting efficiency. At the same time, the high temperature resistance of silver electrodes enables them to maintain stable performance in high-temperature environments, not easily deformed or melted, ensuring the possibility of long-term stable cutting.

In addition, as a key component in plasma cutting, the selection of nozzle material is also crucial. The nozzle of MAXPRO200 uses a special high-temperature resistant alloy material. This alloy material has a very high melting point and excellent thermal stability, and can withstand high temperatures generated during plasma cutting. At the same time, it also has excellent corrosion resistance, which can resist the erosion of corrosive gases and residues that may be generated during the cutting process, thereby extending the service life of the nozzle.

In addition to electrodes and nozzles, other accessories of MAXPRO200, such as cutting torches, wires, etc., are also made of high-quality materials. These materials have high strength, wear resistance, and flexibility, and can withstand mechanical impacts and vibrations during the cutting process, ensuring the stability and accuracy of cutting.

The special performance of these accessories is reflected in the following aspects:

Efficient cutting: Due to the use of high conductivity and high-temperature resistant materials, accessories can support faster cutting speeds and improve production efficiency.

High precision cutting: High quality materials and precise design enable accessories to maintain stable performance during the cutting process, achieving high-precision cutting.

Long lifespan: The wear-resistant and corrosion-resistant materials make the accessories have a longer service life, reducing the frequency of replacement and maintenance costs.

Safe and reliable: The design and material selection of accessories fully consider safety, which can effectively prevent accidents and ensure the safety of operators.

Maxpro200 Plasma  Electrode 220487  220528 Nozzle 220831 220890 Shield 220532 220536