| Quantity: | |
|---|---|
F2007
Kjellberg
· Please check the delivery directly on the basis of the order and delivery documents on completeness and
correctness. In the case of incompleteness or deviations please inform the supplier and the carrier
immediately.
· Please check the delivery immediately on damages. Damages have to be announced immediately to the
carrier and supplier.
A damage report has to be generated.
The unit is designed for a service in explosion-proofed rooms or in the free air by using a roofing under
following conditions:
· ambient temperature:
· relative moisture:
Place the power source so that the air flow is not blocked. The unit is to be set up in such a way that the
cooling air can enter and escape unhindered by the ventilation openings. A free distance of at least
250 mm should be kept around all 4 sides of the unit
Avoid that dust (especially metallic particles), acid damp, corrosive substances and gases can enter the unit.
The life time and the function of the plasma cutting will be influenced.
The Plasma Cutting Machine is designed acc. to the requirements of the protection class , that means:
· protection against penetration of solid parts above 12 mm size
· drip-proof protection against straight dropping water
The unit has to be installed horizontally.
At maintenance work a distance of approx. 1000 mm should be kept around all 4 sides of the unit.
Plasma Cutting Consumable F2007 Nozzle.11.855.401.407 For Kjellberg Torch
· Please check the delivery directly on the basis of the order and delivery documents on completeness and
correctness. In the case of incompleteness or deviations please inform the supplier and the carrier
immediately.
· Please check the delivery immediately on damages. Damages have to be announced immediately to the
carrier and supplier.
A damage report has to be generated.
The unit is designed for a service in explosion-proofed rooms or in the free air by using a roofing under
following conditions:
· ambient temperature:
· relative moisture:
Place the power source so that the air flow is not blocked. The unit is to be set up in such a way that the
cooling air can enter and escape unhindered by the ventilation openings. A free distance of at least
250 mm should be kept around all 4 sides of the unit
Avoid that dust (especially metallic particles), acid damp, corrosive substances and gases can enter the unit.
The life time and the function of the plasma cutting will be influenced.
The Plasma Cutting Machine is designed acc. to the requirements of the protection class , that means:
· protection against penetration of solid parts above 12 mm size
· drip-proof protection against straight dropping water
The unit has to be installed horizontally.
At maintenance work a distance of approx. 1000 mm should be kept around all 4 sides of the unit.
Plasma Cutting Consumable F2007 Nozzle.11.855.401.407 For Kjellberg Torch