| Quantity: | |
|---|---|
S002Y
Kjellberg
The plasma torch connection unit has to be fixed to the guiding system or to a robot, the customer is using.
For the correct fastening the bottom plate of the PBA is furnished with four distance pieces
(with threads M6 inside/outside).
Two attachment variants result:
1.with distance pieces at the supplied condition
2.with turned distance pieces
Afterwards cables of the hose parcel PZL will be inserted into the PBA and fastened there.
The numbered connecting hoses for the gas supply have to be installed gas proof to the respective
connectors 1 and 4. The control hose is attached inside the connection plate. The plug of control lines will
be plugged in X114A, X121A and X122B and surely locked.
Connect the plasma torch with the output side of the PBA-161; exactly how the connection of hose parcel
PZL with the input side. The plasma gas hoses are screwed according to the outer designations as well as
the inner designations of control gas (G1/8").The connections for plasma and igniting gas are indicated in
colour to the distinction.
After finishing the installation work close the cover, otherwise the door switch avoids starting of plasma power source!
Plasma Cutting Consumable S002Y Electrode.11.843.021.320 For Kjellberg Torch
The plasma torch connection unit has to be fixed to the guiding system or to a robot, the customer is using.
For the correct fastening the bottom plate of the PBA is furnished with four distance pieces
(with threads M6 inside/outside).
Two attachment variants result:
1.with distance pieces at the supplied condition
2.with turned distance pieces
Afterwards cables of the hose parcel PZL will be inserted into the PBA and fastened there.
The numbered connecting hoses for the gas supply have to be installed gas proof to the respective
connectors 1 and 4. The control hose is attached inside the connection plate. The plug of control lines will
be plugged in X114A, X121A and X122B and surely locked.
Connect the plasma torch with the output side of the PBA-161; exactly how the connection of hose parcel
PZL with the input side. The plasma gas hoses are screwed according to the outer designations as well as
the inner designations of control gas (G1/8").The connections for plasma and igniting gas are indicated in
colour to the distinction.
After finishing the installation work close the cover, otherwise the door switch avoids starting of plasma power source!
Plasma Cutting Consumable S002Y Electrode.11.843.021.320 For Kjellberg Torch