Plasma Cutting Electrode 220669 Nozzle 220671 Shield 220673 220674 Retaining Cap 220713 For Hypertherm PMX45

The Powermax45 is a highly portable, 45-amp, handheld and mechanized plasma cutting system appropriate for a

wide range of applications. The Powermax45 uses air or nitrogen to cut electrically conductive metals, such as mild

or stainless steel or aluminum. With it, you can cut thicknesses up to 25.4 mm (1 inch) and pierce thicknesses up to

9.5 mm (3/8 inch).

The standard Powermax45 includes one complete set of the consumables needed for cutting (shield, retaining cap,

swirl ring, nozzle, electrode), 2 spare electrodes(220669), 2 spare nozzles(220671), gouging consumables (handheld configurations only),

a quick-disconnect air fitting (1/4 NPT on CSA units and 1/4 NPT x G-1/4 BSPP on CE units), a consumables box,

a shoulder strap, an Operator Manual, a Quick Setup Card, and a Setup DVD. Mechanized configurations include a

remote-start pendant as well.

You can order additional consumables and accessories – such as the plasma cutting guide – from any distributor. See the Parts section for a list of spare and optional parts.

The power cords on the 200–240 V CSA power supplies are shipped with a 50 A, 250 V plug (NEMA 6-50P) on the

power cord. The CE units and the 480 V CSA units are shipped without a plug on the power cord. See Prepare the

electrical power in the Power Supply Setup section for more information.

220674 Shield

220713 Retaining cap

220671 Nozzle

220670 Swirl ring

220669 Electrode

Powermax45 Electrode 220669 Nozzle 220671 Shield 220673 220674 Retaining Cap 220713