| Quantity: | |
|---|---|
277131 277282 277286 277284 277151
Kailburn
The Spirit system is shipped without torch coolant in the reservoir. Coolant must be added before applying power to the system. Only use Kaliburn approved torch coolant solution for optimal system performance as commercially available antifreeze contains corrosion inhibitors that will damage the cooling system. The standard coolant solution consists of 25% industrial grade propylene glycol and provides freezing protection down to -13º C (9º F). The standard solution can be ordered in one-gallon containers, PN 500695. For operating temperatures below -13º C, a 50% solution of industrial grade propylene glycol can be ordered in one-gallon containers, PN 500895, providing protection down to -36º C (-33º F). Failure to use the proper propylene glycol solution may result in cooling system and/or torch damage. The torch coolant should be flushed out of the Spirit system every six months and replaced with new coolant. The coolant filter / deionization cartridge should also be changed at the same time. See Section 6 for details.
The system generates high noise levels while cutting. Depending on the size of the cutting area, distance from the cutting torch, and arc current cutting level, acceptable noise levels may be exceeded. Proper ear protection should be used as defined by local or national codes. The following chart gives the noise levels generated by the system when operating at 400 amps, 205 arc volts. The measurements were made with a sound level meter.
Plasma Cutting Electrode 277131 277282 Nozzle 277284 277125 Shield 277150 Retaining Cap 277151 For Kailburn
The Spirit system is shipped without torch coolant in the reservoir. Coolant must be added before applying power to the system. Only use Kaliburn approved torch coolant solution for optimal system performance as commercially available antifreeze contains corrosion inhibitors that will damage the cooling system. The standard coolant solution consists of 25% industrial grade propylene glycol and provides freezing protection down to -13º C (9º F). The standard solution can be ordered in one-gallon containers, PN 500695. For operating temperatures below -13º C, a 50% solution of industrial grade propylene glycol can be ordered in one-gallon containers, PN 500895, providing protection down to -36º C (-33º F). Failure to use the proper propylene glycol solution may result in cooling system and/or torch damage. The torch coolant should be flushed out of the Spirit system every six months and replaced with new coolant. The coolant filter / deionization cartridge should also be changed at the same time. See Section 6 for details.
The system generates high noise levels while cutting. Depending on the size of the cutting area, distance from the cutting torch, and arc current cutting level, acceptable noise levels may be exceeded. Proper ear protection should be used as defined by local or national codes. The following chart gives the noise levels generated by the system when operating at 400 amps, 205 arc volts. The measurements were made with a sound level meter.
Plasma Cutting Electrode 277131 277282 Nozzle 277284 277125 Shield 277150 Retaining Cap 277151 For Kailburn