| Quantity: | |
|---|---|
420240 420258 420249 420234 420225 420228 420237 420513 420327
Hypertherm
General
XPR cutting systems are designed for indoor use with correct ventilation to cut a wide range of thicknesses of mild steel, stainless steel, and aluminum.
Plasma power supply
The plasma power supply is a 300 A, 210 VDC constant-current supply. It contains a heat exchanger, fans, and a pump to cool the torch and other electronic components. The plasma power supply supports EtherCAT®, wireless, RS-422 serial, and discrete communication protocols to communicate with a CNC or wireless device. A green power LED illuminates when power is supplied to the plasma power supply.
Gas connect consoles
There are 3 types of gas connect consoles: Core™, VWI™ (vented water injection), and OptiMix™. Each type provides a different set of gas connection capabilities, which provide selecting and metering functions for the gas control system. The gas connect console has 2 printed circuit boards (PCBs): a control PCB and an ignition PCB. If your XPR cutting system is equipped with an OptiMix gas connect console, there is also a gas mixer that has its own control board. A green power LED illuminates when power is supplied to the console. 2
For some cutting systems, a remote on-off switch controls the power that goes to the console.
Torch connect console
The torch connect console has proportional valves, solenoid valves, and pressure transducers. The torch connect console also has 2 PCBs, a control PCB, and an ohmic contact PCB. The torch connect console provides all power, gas, and cooling connections for connection to the torch. A green power LED illuminates when power is supplied to the console. 2
For some cutting systems, a remote on-off switch controls the power that goes to the console.
Torch
The virtually dross-free cutting capacity of the torch is 32 mm (1.26 in.) for cutting. The argon assist pierce capacity is 50 mm (1.97 in.) for mild steel. The production pierce capacity is 45 mm (1.77 in.) for mild steel and 38 mm (1.50 in.) for both stainless steel and aluminum. The maximum cutting capacity (edge start) is 80 mm (3.15 in.) for mild steel, 75 mm (2.95 in.) for stainless steel, and 50 mm (1.97 in.) for aluminum.
Electrode 420276
Electrode 420231
Electrode 420240
Electrode 420249
Electrode 420258
Electrode 420303
Plasma Electrode Nozzle Shield 420240 420258 420249 420234 420225 420228 420237 420513 420327 For XPR300
General
XPR cutting systems are designed for indoor use with correct ventilation to cut a wide range of thicknesses of mild steel, stainless steel, and aluminum.
Plasma power supply
The plasma power supply is a 300 A, 210 VDC constant-current supply. It contains a heat exchanger, fans, and a pump to cool the torch and other electronic components. The plasma power supply supports EtherCAT®, wireless, RS-422 serial, and discrete communication protocols to communicate with a CNC or wireless device. A green power LED illuminates when power is supplied to the plasma power supply.
Gas connect consoles
There are 3 types of gas connect consoles: Core™, VWI™ (vented water injection), and OptiMix™. Each type provides a different set of gas connection capabilities, which provide selecting and metering functions for the gas control system. The gas connect console has 2 printed circuit boards (PCBs): a control PCB and an ignition PCB. If your XPR cutting system is equipped with an OptiMix gas connect console, there is also a gas mixer that has its own control board. A green power LED illuminates when power is supplied to the console. 2
For some cutting systems, a remote on-off switch controls the power that goes to the console.
Torch connect console
The torch connect console has proportional valves, solenoid valves, and pressure transducers. The torch connect console also has 2 PCBs, a control PCB, and an ohmic contact PCB. The torch connect console provides all power, gas, and cooling connections for connection to the torch. A green power LED illuminates when power is supplied to the console. 2
For some cutting systems, a remote on-off switch controls the power that goes to the console.
Torch
The virtually dross-free cutting capacity of the torch is 32 mm (1.26 in.) for cutting. The argon assist pierce capacity is 50 mm (1.97 in.) for mild steel. The production pierce capacity is 45 mm (1.77 in.) for mild steel and 38 mm (1.50 in.) for both stainless steel and aluminum. The maximum cutting capacity (edge start) is 80 mm (3.15 in.) for mild steel, 75 mm (2.95 in.) for stainless steel, and 50 mm (1.97 in.) for aluminum.
Electrode 420276
Electrode 420231
Electrode 420240
Electrode 420249
Electrode 420258
Electrode 420303
Plasma Electrode Nozzle Shield 420240 420258 420249 420234 420225 420228 420237 420513 420327 For XPR300