| Quantity: | |
|---|---|
9-8215 9-8232 9-8208 9-8210 9-8212 9-8253 9-8256 9-8238 9-8239 9-8245
Thermal Dynamics
1. The torch can be comfortably held in one hand or steadied with two hands. Position the hand to press the Trigger on the torch handle. With the hand torch, the hand may be positioned close to the torch head for maximum con-trol or near the back end for maximum heat protection. Choose the technique that feels most comfortable and allows good control and movement.
2. Angle the torch slightly to direct blowback particles away from the torch tip (and operator) rather than directly back into it until the pierce is complete.
3. In a portion of the unwanted metal start the pierce off the cutting line and then continue the cut onto the line. Hold the torch perpendicular to the workpiece after the pierce is complete.
4. Hold the torch away from your body.
5. Slide the trigger release toward the back of the torch handle while simultaneously squeezing the trigger. The pilot arc will start.
6. Bring the torch within transfer distance to the work. The main arc will transfer to the work,and the pilot arc will shut off.
7. Clean spatter and scale from the shield cup and the tip as soon as possible. Spraying theshield cup in anti - spatter compound will minimize the amount of scale which adheres to it.
SL60SL100 Plasma Electrode Nozzle Shield Cap 9-8277 9-8254 9-8239 9-8235 9-8228 9-8220 Torch Parts
1. The torch can be comfortably held in one hand or steadied with two hands. Position the hand to press the Trigger on the torch handle. With the hand torch, the hand may be positioned close to the torch head for maximum con-trol or near the back end for maximum heat protection. Choose the technique that feels most comfortable and allows good control and movement.
2. Angle the torch slightly to direct blowback particles away from the torch tip (and operator) rather than directly back into it until the pierce is complete.
3. In a portion of the unwanted metal start the pierce off the cutting line and then continue the cut onto the line. Hold the torch perpendicular to the workpiece after the pierce is complete.
4. Hold the torch away from your body.
5. Slide the trigger release toward the back of the torch handle while simultaneously squeezing the trigger. The pilot arc will start.
6. Bring the torch within transfer distance to the work. The main arc will transfer to the work,and the pilot arc will shut off.
7. Clean spatter and scale from the shield cup and the tip as soon as possible. Spraying theshield cup in anti - spatter compound will minimize the amount of scale which adheres to it.
SL60SL100 Plasma Electrode Nozzle Shield Cap 9-8277 9-8254 9-8239 9-8235 9-8228 9-8220 Torch Parts