| Quantity: | |
|---|---|
9-8215 9-8232 9-8208 9-8210 9-8212 9-8253 9-8256 9-8238 9-8239 9-8245
Thermal Dynamics
Scope of Manual
This manual contains descriptions, operating instruc-tions and maintenance procedures for the 1Torch Models SL60/Manual and SL100/Mechanized Plasma Cutting Torches. Service of this equipment is re-stricted to properly trained personnel; unqualified
personnel are strictly cautioned against attempting repairs or adjustments not covered in this manual, at the risk of voiding the Warranty.Read this manual thoroughly. A complete under-standing of the characteristics and capabilities of thisequipment will assure the dependable operation for which it was designed.
General Description
Plasma torches are similar in design to the automotive spark plug. They consist of negative and positive sec-tions separated by a center insulator. Inside the torch,
the pilot arc starts in the gap between the negatively charged electrode and the positively charged tip.Once the pilot arc has ionized the plasma gas, the superheated column of gas flows through the small orifice in the torch tip, which is focused on the metal
to be cut.
A single torch lead provides gas from a single source to be used as both the plasma and secondary gas.The air flow is divided inside the torch head. Single- gas operation provides a smaller sized torch and inexpensive operation.
An operation,Refer to Section "2T.05 Introduction to Plasma", for a more detailed description of plasma torch operation.Refer to the Appendix Pages for additional specifi-
cations as related to the Power Supply used.
Thermal Dynamics SL60 SL100 Electrode 9-8215 Nozzle 9-8208 Shield 9-8256
Scope of Manual
This manual contains descriptions, operating instruc-tions and maintenance procedures for the 1Torch Models SL60/Manual and SL100/Mechanized Plasma Cutting Torches. Service of this equipment is re-stricted to properly trained personnel; unqualified
personnel are strictly cautioned against attempting repairs or adjustments not covered in this manual, at the risk of voiding the Warranty.Read this manual thoroughly. A complete under-standing of the characteristics and capabilities of thisequipment will assure the dependable operation for which it was designed.
General Description
Plasma torches are similar in design to the automotive spark plug. They consist of negative and positive sec-tions separated by a center insulator. Inside the torch,
the pilot arc starts in the gap between the negatively charged electrode and the positively charged tip.Once the pilot arc has ionized the plasma gas, the superheated column of gas flows through the small orifice in the torch tip, which is focused on the metal
to be cut.
A single torch lead provides gas from a single source to be used as both the plasma and secondary gas.The air flow is divided inside the torch head. Single- gas operation provides a smaller sized torch and inexpensive operation.
An operation,Refer to Section "2T.05 Introduction to Plasma", for a more detailed description of plasma torch operation.Refer to the Appendix Pages for additional specifi-
cations as related to the Power Supply used.
Thermal Dynamics SL60 SL100 Electrode 9-8215 Nozzle 9-8208 Shield 9-8256